Drive efficiency to it's full potential with a 2 flute compression chip breaker. These bits will produce chips at an astonishing rate and leave a perfect top and bottom finish.
Suitable for
- Composite Materials (not ACP/ACM)
- Laminate
- Melamine
- Melamine Particle Board
- MDF/HDF
- Veneered Plywood
- Softwood
Not advisable
- Hardwoods
Adam’s Tips
These bits are meant for industrial application and must be treated mean to be kept sharp. This means they will need to be feed at a high rate so that the bit does not overheat or collect residue. Alternatively, drop your spindle speed to ensure a consistent chip load.
| Feeds and Speeds - HERO 2 Flute Compression mm per minute | ||
| Wood | ||
| Item Code | Description | Soft |
| M16-4006228 | 6mm x 12.7mm x 22mm 2F | 13,150 |
| M16-4008228 | 8mm x 12.7mm x 22mm 2F | 29,100 |
| Revolutions per minute 16,000RPM | ||
| 100% width per cut slotting | ||
| Depth per cut Diameter x 1 | ||
NOTE ON TRANSITIONING TO ARDEN
You might have noticed that each router bit profile shows both Arden and Hero. Truth is that they are the same company and the only difference is the colour and name. Until all Hero stock has been exhausted, we will be supplying one or the other or both.
1 Review Hide Reviews Show Reviews
-
Great bit
High quality item and packaging
