High efficiency 3 flute chip breaker for hogging and slotting dense material. A staggered chip breaker grind on each flute to produces small chips for easier evacuation. This allows for a cleaner cut at high feed rates with minimal vibration (50% higher than 2 flute).
Suitable for
- Wood (MDF, hardwood)
- Wood (Ply & softwoods)
Adam’s Tips
These bits are meant for industrial application and must be treated mean to be kept sharp. This means they will need to be feed at a high rate so that the bit does not overheat or collect residue. Alternatively, drop your spindle speed to ensure a consistent chip load.
| Feeds and Speeds - 3 Flute Chip breaker mm per minute | |||
| Wood | |||
| Item Code | Description | Soft | Hard |
| 8-8-SP-3F-25 | 8mm x 8mm x 25mm 3F | 43,350 | 21,700 |
| 12-12-SP-3F-35 | 12mm x 12mm x 35mm 3F | 114,450 | 57,250 |
| Revolutions per minute 16,000RPM | |||
| 100% width per cut slotting | |||
| Depth per cut Diameter x 1 | |||
