The most versatile bit you need to have in your set is the tapered ball nose. Capable of engraving wood, plastics, soft metals and even steel, these are a high quality bit and withstand a beating even with a R0.25mm tip. Some uses of this bit include cutting PCB tracks, engraving lettering in ABS or even steel plates, 3D carving of aluminium or brass and much more.
Suitable for
- Plastics (ABS, acrylic, HPDE etc.)
- Wood
- Steel
- Soft Metals (use an appropriate coolant)
- Ferrous metals (use an appropriate lubricant)
Adam’s Tips
Avoid a deep depth of cut to improve the finish of your material and increase the feed rate to make up for lost time. Also, use a coolant when cutting soft metals and lubricant when cutting ferrous metals to ensure the cleanest finish.
| Description | Shank | Radius | Cutting Length | Angle |
| R0.25mm x 3.175mm x 15mm 2F | 3.175 | R0.25 | 15 | 5 |
| R0.5mm x 3.175mm x 15mm 2F | 3.175 | R0.5 | 15 | 4.2 |
| R0.75mm x 3.175mm x 15mm 2F | 3.175 | R0.75 | 15 | 3.2 |
| R1.0mm x 3.175mm x 15mm 2F | 3.175 | R1.0 | 15 | 2.2 |
| R0.25mm x 6mm x 20mm 2F | 6 | R0.25 | 20 | 7.8 |
| R0.5mm x 6mm x 20mm 2F | 6 | R0.5 | 20 | 7.1 |
| R0.75mm x 6mm x 20mm 2F | 6 | R0.75 | 20 | 6.4 |
| R1mm x 6mm x 20mm 2F | 6 | R1 | 20 | 5.7 |
| R1.5mm x 6mm x 20mm 2F | 6 | R1.5 | 20 | 4.3 |
| R2mm x 6mm x 20mm 2F | 6 | R2 | 20 | 2.9 |
| R0.25mm x 6mm x 30.5mm 2F | 6 | R0.25 | 30.5 | 5.2 |
| R0.5mm x 6mm x 30.5mm 2F | 6 | R0.5 | 30.5 | 4.7 |
| R0.75mm x 6mm x 30.5mm 2F | 6 | R0.75 | 30.5 | 4.2 |
| R1.0mm x 6mm x 30.5mm 2F | 6 | R1.0 | 30.5 | 3.8 |
| R1.5mm x 6mm x 30.5mm 2F | 6 | R1.5 | 30.5 | 2.8 |
| R2.0mm x 6mm x 30.5mm 2F | 6 | R2.0 | 30.5 | 1.9 |
48 Reviews Hide Reviews Show Reviews
-
Tapered ballnose
Only used once, cut finish is very good.
-
2 FLUTE TAPERED BALL NOSE
Works very well for me. It has the stiffness and reach to be able to cut the really deep detail.
-
Tapered Ball Nose bit
First time using these bits. Will be purchasing again. Great to deal with.
-
Tapered Ball Nose
Great bits stay sharp for a good time and the delivery was fast with a fair price
-
Tapered ball nosed bit
Well made product. Will be more careful with these new ones lol
-
Tapered ballnose
Always do a good job. Very satisfied
-
2F Tapered Ballnose
Recently purchased a few TBN cutters from .5 to 2mm tip. Tonight I used one with a 1.5mm tip to do a 3d carve, it worked quite nicely. I have purchased these from Adam's Bits and like all his other cutters I find it hard to find any difference in quality than more expensive brands. I use the TBN mainly because I can often go straight to a finish pass without roughing, which is possible if one uses a raster toolpath. But it depends on the design.
-
0.25mm tapered ball mill
I carve some insane detailed STL files with this, it works absolutely awesome! If you carve 3D reliefs then I honesty can’t recommend a better bit!
-
Tapered Ball Nose Mill review
Excellent, sharp and strong bits. These bits are great for carving out details (used in hardwood) and produce a reliable and clean finish.
