The most versatile bit you need to have in your set is the tapered ball nose. Capable of engraving wood, plastics, soft metals and even steel, these are a high quality bit and withstand a beating even with a R0.25mm tip. Some uses of this bit include cutting PCB tracks, engraving lettering in ABS or even steel plates, 3D carving of aluminium or brass and much more.
Suitable for
- Plastics (ABS, acrylic, HPDE etc.)
- Wood
- Steel
- Soft Metals (use an appropriate coolant)
- Ferrous metals (use an appropriate lubricant)
Adam’s Tips
Avoid a deep depth of cut to improve the finish of your material and increase the feed rate to make up for lost time. Also, use a coolant when cutting soft metals and lubricant when cutting ferrous metals to ensure the cleanest finish.
| Description | Shank | Radius | Cutting Length | Angle |
| R0.25mm x 3.175mm x 15mm 2F | 3.175 | R0.25 | 15 | 5 |
| R0.5mm x 3.175mm x 15mm 2F | 3.175 | R0.5 | 15 | 4.2 |
| R0.75mm x 3.175mm x 15mm 2F | 3.175 | R0.75 | 15 | 3.2 |
| R1.0mm x 3.175mm x 15mm 2F | 3.175 | R1.0 | 15 | 2.2 |
| R0.25mm x 6mm x 20mm 2F | 6 | R0.25 | 20 | 7.8 |
| R0.5mm x 6mm x 20mm 2F | 6 | R0.5 | 20 | 7.1 |
| R0.75mm x 6mm x 20mm 2F | 6 | R0.75 | 20 | 6.4 |
| R1mm x 6mm x 20mm 2F | 6 | R1 | 20 | 5.7 |
| R1.5mm x 6mm x 20mm 2F | 6 | R1.5 | 20 | 4.3 |
| R2mm x 6mm x 20mm 2F | 6 | R2 | 20 | 2.9 |
| R0.25mm x 6mm x 30.5mm 2F | 6 | R0.25 | 30.5 | 5.2 |
| R0.5mm x 6mm x 30.5mm 2F | 6 | R0.5 | 30.5 | 4.7 |
| R0.75mm x 6mm x 30.5mm 2F | 6 | R0.75 | 30.5 | 4.2 |
| R1.0mm x 6mm x 30.5mm 2F | 6 | R1.0 | 30.5 | 3.8 |
| R1.5mm x 6mm x 30.5mm 2F | 6 | R1.5 | 30.5 | 2.8 |
| R2.0mm x 6mm x 30.5mm 2F | 6 | R2.0 | 30.5 | 1.9 |
48 Reviews Hide Reviews Show Reviews
-
R1.0 2 FLUTE TAPERED BALL NOSE CARBIDE MILL
Very good quality, Fast delivery.
-
2 FLUTE TAPERED BALL NOSE CARBIDE MILL (FOR 3D CARVING
shipped fast and product is as described. and the bit is awesome as per all of adam's bits
-
2mm tapered ball nose bits
I found the bits to be of first grade in all respects, very well made and SHARP! Adam was especially helpful and delivery was swift. Thoroughly recommended.
-
Tapered bull nose
as newbie I found this bit very good to use as I tried 2.5 d carving
-
2 Flute TAPERED Ball Nose Carbide Mill
Good service, quality products
-
Excellent
Excellent
-
Tapered bullnose
This tool worked well on MDF. I found the few tools used so far from large amount purchased to be priced well considering others investigated, performed in a fashion that caused no issues or concern and made the purchase justified.
-
Great Quality
These are awesome quality bits with long carve lives
-
Really good quality
Product description could have the dimensions outlined. I tought i ordere 2mm wide bit but now looking at specs states R2.0 so its probably 4mm
