2 Flute STRAIGHT cutter carbide CNC router bit is a popular choice among "decor warriors" who work with MDF and plywood. These mills have straight blades that make them suitable for cutting a variety of timber materials, such as plywood, melamine chipboard, whiteboard, and veneers. They are also cost-effective compared to other types of end mills, like down and compression cutters, and provide a good finish on both sides of the material. Clean up is easy, just a little brush is needed to remove any residual burrs. The disadvantage is that due to the straight geometry, they may dull more quickly than other end mill types. Popular sizes include 1mm diameter for 3mm material, 1.5mm for 6mm, 2mm for 17mm and 1/8" for 18mm material.
Suitable for
- Wood (MDF, hardwood)
- Wood (Ply & softwoods)
Adam’s Tips
A straight flute end mill is a useful tool for cutting a variety of materials, but it does create a significant amount of dust as opposed to chips. Therefore, it is important to have proper ventilation or dust extraction in place to ensure a safe and healthy working environment. One benefit of this dust is that it gets packed back into the slot made by the end mill, which can help to hold the material in place. This eliminates the need to use tabs or tape to secure the material and can save time on handling. However, it's also important to keep in mind that the dust created is fine particulates which can be harmful to health, it's highly recommend to make sure the dust created is disposed off properly and safely.
| Feeds and Speeds - 2 Flute Straight Cut mm per minute |
|||
| Wood | |||
| Item Code | Description | Soft | Hard |
| 1-1/8-ST-2F-3 | 1mm x 3.175mm x 3mm 2F | 1,350 | 700 |
| 1.5-1/8-ST-2F-8 | 1.5mm x 3.175mm x 8mm 2F | 1,800 | 900 |
| 2-1/8-ST-2F-12 | 2mm x 3.175mm x 12mm 2F | 2,300 | 1,150 |
| 2-1/8-ST-2F-17 | 2mm x 3.175mm x 17mm 2F | 1,850 | 950 |
| 1/8-1/8-ST-2F-12 | 3.175mm x 3.175mm x 12mm 2F | 4,850 | 2,450 |
| 1/8-1/8-ST-2F-17 | 3.175mm x 3.175mm x 17mm 2F | 3,900 | 1,950 |
| 1/8-1/8-ST-2F-22 | 3.175mm x 3.175mm x 22mm 2F | 3,100 | 1,550 |
| 1/8-1/8-ST-2F-32 | 3.175mm x 3.175mm x 32mm 2F | 2,000 | 1,000 |
| 4-4-ST-2F-17 | 4mm x 4mm x 17mm 2F | 6,050 | 3,050 |
| 4-4-ST-2F-22 | 4mm x 4mm x 22mm 2F | 4,800 | 2,400 |
| 4-4-ST-2F-32 | 4mm x 4mm x 32mm 2F | 3,100 | 1,550 |
| 6-6-ST-2F-22 | 6mm x 6mm x 22mm 2F | 11,950 | 6,000 |
| 6-6-ST-2F-32 | 6mm x 6mm x 32mm 2F | 7,650 | 3,850 |
| 6-6-ST-2F-52 | 6mm x 6mm x 52mm 2F | 3,150 | 1,600 |
| 8-8-ST-2F-32 | 8mm x 8mm x 32mm 2F | 16,900 | 8,450 |
| 8-8-ST-2F-62 | 8mm x 8mm x 62mm 2F | 4,400 | 2,200 |
| 10-10-ST-2F-52 | 10mm x 10mm x 52mm 2F | 14,300 | 7,150 |
| Revolutions per minute 16,000RPM | |||
| 100% width per cut slotting | |||
| Depth per cut Diameter x 1 | |||
86 Reviews Hide Reviews Show Reviews
-
End mills
Fast delivery as always. Quality tool bits!!
-
2 Flute STRAIGHT Carbide End Mill
Great quality, Excellent delivery times. Could not be happier
-
2 Flute Straight Carbide Endmill
These are my go to bits for the work I do. These blokes do exactly what I expect of them. The 3 star rating is only because the don't last as long as I would like them to (sharpness). Other than that they are great for the price of the bit. I have purchased another bit I have yet to use but will in the near future and will leave a review of that as well. One other point is the exceptional time frame from ordering to arriving.
-
2 flute straight carbide end mill
It is allways difficult to get extended use out of a small diameter bit especially when the cutting depth is 1.5 to 2mm. I will allways use Adam's Bits, the service is second to none.
-
2 flute straight bit
These bits blast through material so well. Really are a must have in the arsenal
-
High quality
Great service by Adam. Easy to order and prompt delivery.
-
2 FLUTE STRAIGHT CARBIDE END MILL
Another reasonably priced end mill from Adams Bits that cuts cleanly and efficiently. Very pleased with the results on soft and hard woods.
-
2 flute Straight Cut
I cnc a lot of hard wood, (eg old sleepers). These bits cut quickly and easily, must have good dust extraction. Leave a beautiful flat finish if cutting pockets. Economical and a quality bit.
-
Exactly what we ordered and and received in expedient time frame
Perfect for the jobs we undertake.
