null Skip to main content

2, 3 & 4 Flute UP CUT Carbide End Mill

$5.45
(43 reviews) Write a Review
SKU:
1/8-1/8-SP-2F-22 [C1]
Adding to cart… The item has been added

A spiral fluted up cutter sports a number of cutting edges or “teeth” which means that for every rotation of the bit, that number of edges will be cutting your material. These bits are like a traditional drill bit in which the spirals direct chips up. A benefit of a spiral fluted up cut is that you can drive your bit faster in feed than a single flute. For example, with 2 flute you are able to go 2x faster than a 1 flute, 3 flutes 3x and 4 flute 4x. These cutters are primed for high efficiency cutting on woods but do leave a slight burr on the top of your material and a clean finish on the bottom side.

Suitable for

  • Plastics (ABS, acrylic, HPDE etc.) - 3 & 4 flute not suitable
  • Wood (MDF, hardwood)
  • Wood (Ply & softwoods)

Adam’s Tips

Up cuts have a tendency to pull up the material you are cutting. Ensure that the you are using suitable hold down methods such as double sided tape, masking tape + super glue or clamps over a small area. Also watch out for cut parts popping up if you are using a dust boot.

Feeds and Speeds - Up cut for Wood
mm per minute
   
 Wood 
Item Code Description  Soft   Hard 
1-1/8-SP-2F-6 1mm x 3.175mm x 6mm  2F 1,450 750
1.5-1/8-SP-2F-6 1.5mm x 3.175mm x 6mm  2F 2,450 1,250
1.5-1/8-SP-2F-12 1.5mm x 3.175mm x 12mm  2F 1,900 950
2-1/8-SP-2F-12 2mm x 3.175mm x 12mm  2F 2,850 1,450
2-1/8-SP-2F-17 2mm x 3.175mm x 17mm  2F 2,300 1,150
1/8-1/8-SP-2F-13 3.175mm x 3.175mm x 13mm  2F 5,800 2,900
1/8-1/8-SP-2F-17 3.175mm x 3.175mm x 17mm  2F 4,850 2,450
1/8-1/8-SP-2F-22 3.175mm x 3.175mm x 22mm  2F 3,900 1,950
1/8-1/8-SP-2F-32 3.175mm x 3.175mm x 32mm  2F 2,500 1,250
4-4-SP-2F-22 4mm x 4mm x 22mm  2F 6,000 3,000
4-4-SP-2F-42 4mm x 4mm x 42mm  2F 2,450 1,250
6-6-SP-2F-22 6mm x 6mm x 22mm  2F 14,950 7,500
6-6-SP-2F-32 6mm x 6mm x 32mm  2F 9,550 4,800
6-6-SP-2F-62 6mm x 6mm x 62mm  2F 2,500 1,250
3.175-6.35-SP-2F-17 3.175mm x 6.35mm x 17mm  2F 4,850 2,450
4-6.35-SP-2F-22 4mm x 6.35mm x 22mm  2F 6,000 3,000
6.35-6.35-SP-2F-22 6.35mm x 6.35mm x 22mm  2F 17,300 8,650
1/8-1/8-SP-3F-22 3.175mm x 3.175mm x 22mm  3F 5,800 2,900
4-4-SP-3F-22 4mm x 4mm x 22mm  3F 9,000 4,500
6-6-SP-3F-22 6mm x 6mm x 22mm  3F 22,400 11,200
1/8-1/8-SP-4F-22 3.175mm x 3.175mm x 22mm  4F 7,750 3,900
4-4-SP-4F-22 4mm x 4mm x 22mm  4F 12,000 6,000
6-6-SP-4F-22 6mm x 6mm x 22mm  4F 29,900 14,950
       
Revolutions per minute 16,000RPM    
100% width per cut slotting    
Depth per cut Diameter x 1    

43 Reviews