Up your game with 1 Flute UP CUT End Mill Diamond Like Carbon (for Aluminium)! DLC bits are phenomenal bits in that they last longer, cut quieter and cut with a mirror finish. You will not be dissapointed.
When cutting soft metals like aluminium & brass, there is nothing easier to use and more suitable than a high grade 1 flute up cut. An 1 flute has the best chip ejection and heat dissipation which avoids jamming due to the gummy nature of soft materials. An 1 flute also has the capability to operate effectively with widely varied feeds and speeds as compared to 2 & 3 flute when slotting. For peripheral cutting, a 2 or 3 flute for soft metals is ideal for the side & bottom finish.
Suitable for
- Soft Metals (Aluminium & Brass)
- Plastics (ABS, acrylic, HPDE etc)
- Aluminium Composite Materials
Adam’s Tips
You will get a different finish on the side of your material depending if you use a climb or conventional cut. Do some test cuts and check which side comes out the best and adjust your toolpath accordingly. These bits are great on plastics as they are really tough but do not have a sharp edge. You will be able to run these bits faster on plastic compared to a 1 flute (for plastics) bit but depending on the finish you require, might only be suitable for cutting all the way through.
Check out https://www.facebook.com/watch/?v=604281453557182&extid=RhvPoVr5k2Mj9aeH
| Feeds and Speeds - 1 Flute for Aluminium DLC mm per minute |
||||
| Metals | Plastics | |||
| Item Code | Description | Soft | Soft | Hard |
| 1-1/8-DL-1F-4-Al | 1mm x 3.175mm x 4mm 1F | 100 | 650 | 350 |
| 2-1/8-DL-1F-6-Al | 2mm x 3.175mm x 6mm 1F | 150 | 1,500 | 750 |
| 2-1/8-DL-1F-12-Al | 2mm x 3.175mm x 12mm 1F | 150 | 1,150 | 600 |
| 1/8-1/8-DL-1F-8-Al | 3.175mm x 3.175mm x 8mm 1F | 300 | 2,900 | 1,450 |
| 1/8-1/8-DL-1F-12-Al | 3.175mm x 3.175mm x 12mm 1F | 250 | 2,450 | 1,250 |
| 1/8-1/8-DL-1F-17-Al | 3.175mm x 3.175mm x 17mm 1F | 200 | 1,950 | 1,000 |
| 1/8-1/8-DL-1F-22-Al | 3.175mm x 3.175mm x 22mm 1F | 150 | 1,550 | 800 |
| 4-4-DL-1F-8-Al | 4mm x 4mm x 8mm 1F | 450 | 4,500 | 2,250 |
| 4-4-DL-1F-12-Al | 4mm x 4mm x 12mm 1F | 400 | 3,800 | 1,900 |
| 4-4-DL-1F-17-Al | 4mm x 4mm x 17mm 1F | 300 | 3,050 | 1,550 |
| 4-4-DL-1F-22-Al | 4mm x 4mm x 22mm 1F | 250 | 2,400 | 1,200 |
| 6-6-DL-1F-17-Al | 6mm x 6mm x 17mm 1F | 750 | 7,500 | 3,750 |
| 6-6-DL-1F-22-Al | 6mm x 6mm x 22mm 1F | 600 | 6,000 | 3,000 |
| 6-6-DL-1F-32-Al | 6mm x 6mm x 32mm 1F | 400 | 3,850 | 1,950 |
| 8-8-DL-1F-22-Al | 8mm x 8mm x 22mm 1F | 1250 | 13,250 | 6,650 |
| 10-10-DL-1F-32-Al | 10mm x 10mm x 32mm 1F | 1650 | 17,550 | 8,800 |
| Revolutions per minute | 24,000 | 16,000 | 16,000 | |
| 100% width per cut slotting | ||||
| Depth per cut Diameter x 1 | ||||
23 Reviews Hide Reviews Show Reviews
-
I think they are a really great end bit
It's a great end bit, drill well can't fault it.
-
Cutting
Perfect End mill for cutting Aluminium on my router. these by far out last any other brand that I have used and keep the cut quality very nice for a long time.
-
I think they are a really great end bit
They are sharp and durable
-
Cnc bits
Always the bets bits, would recommend to anyone
-
Cnc bits
Best supplier I have found near me always promt with deliveries, the even threw in a couple of extra bit in the last order. Much apreciated
-
1 Flute up cut DLC for aluminium
On a recommendation from Adam to try this bit out, I can't fault it. Given some choice advice from him and excellent pricing I can't really fault what Adam supplies.
-
6mm single flute up cut end mill diamond like carbon (for Ally)
Best bit eats aluminium. Cutting 2200mm/min. 3mm sheet
-
1 flute upcut end mill
Very fast delivery, excellent quality item very happy and will be purchasing all my milling bits from here from now on
-
4-6mm single flute up cut end mill diamond like carbon (for Ally)
Excellent bits
